|
Testing Tool
|
Manufacturer
|
Description
|
|
Advantech USB port switch
|
Adventech
|
The JSystem Adventech driver connects enables to deploy the Adventech port switch in order to test system behavior during turn on and turn off.
|
|
Airopeek
|
Wildpackets
|
The Airopeek driver enables to activate the Airopeek wireless traffic sniffer from within a JSystem test scenario. The driver capabilities include importing captured traffic data into JSystem for analysis.
|
|
Abacus
|
Spirent
|
The JSystem Abacus driver enables to load Abacus configurations, change configuration parameters, play the test, read statistics and analyze them.
|
|
Apcon
|
Apcon
|
The JSystem Apcon driver enables full control of the Apcon device and its functionality, such as attaching and detaching ports.
|
|
Avalanche
|
Spirent
|
The JSystem Avalanche driver enables to load Avalanche configurations, change configuration parameters, play tests, read statistics and analyze them.
|
|
Cisco routers and switch
|
Cisco
|
The JSystem driver for Cisco routers and switches is able to control, from within a JSystescenario,o, router functionalities such as packet policy and port access.
|
|
Hammer
|
Empririx
|
The JSystem Hammer driver runs Hammer tests for voice communication; starting and ending tests, monitoring, gathering results and generating test statistics.
|
|
Iperf
|
Open source
|
The JSystem Iperf driver controls and manages both the Iperf server side and client side.
Traffic results are saved on the Iperf server and then transferred to JSystem for analysis.
|
|
IxChariot
|
IXIA
|
The JSystem IxChariot driver enables to load IxChariot configuration, change configuration parameters, play the test, read statistics and analyze them.
With the driver, post testing and execution statistics can be gathered and analyzed,and reports generated.
|
|
IxExplorer
|
IXIA
|
The IxExplorer driver provides an API with parallel functionality to the IxExplorer GUI application.
This enables to configure IxExplorer, run, read statistics and analyze counters and packets from within JSystem.
|
|
IxLoad
|
IXIA
|
With the IxLoad driver a JSystem test scenario can be built, which loads an IxLoad repository file, selects one or more tests and activates the tests.
With the driver, post testing and execution statistics can be gathered and analyzed, and reports generated.
|
|
IxVoice
|
IXIA
|
With the IxVoice driver a JSystem test scenario can be built which loads an IxVoice configuration file and activates the tests.
With the driver, post testing and execution statistics can be gathered and analyzed, and reports generated.
|
|
JScapy
|
Open source
|
The JSystem Scapy driver enables you to turn a standard PC into a traffic generator and analyzer with parallel functionality to IxEcplorer and TestCenter system objects.
|
|
N2X
|
Agilent
|
The JSystem driver for N2X enables to configure N2X L2 and L3 streams run traffic, read statistics and analyze counters and packets within JSystem.
|
|
Pseudo StatefullTcp
|
Ignis Software
|
This JSystem driver enables to configure an L2/3 traffic generator (such as Ixia) to mimic a Tcp session between two ports, including the start and stop controls.
This driver does not support statefull session but enables full wire speed Tcp traffic.
|
|
RFC 2544
|
Ignis Software
|
This JSystem driver enables the tester to perform RFC 2544 (throughput and latency) over standard traffic generators.
The driver supports configurable result-publishing mechanisms. This enables the tester to build elaborate Excel reports, combining test configurations and results.
|
|
Smartbits
|
Spirent
|
The JSystem driver for Smartbits provides an API with almost parallel functionality to the Smartbits GUI application.
This enables to configure Smartbits, run, read statistics and analyze counters and packets from within JSystem.
|
|
Storm
|
Shunra Software
|
The JSystem driver for Storm enables to configure the Storm HW, load test configuration, change test parameters, read statistics, analyze.
|
|
TestCenter
|
Spirent
|
The JSystem driver for TestCenter provides an API with almost parallel functionality to the TestCenter GUI application.
This enables to configure TestCenter, run, read statistics and analyze counters and packets from within JSystem.
This JSystem TestCenter driver also supports protocols configuration of the TestCenter device.
|
|
Wireshark
|
Open source
|
The JSystem Wireshark driver provides an API to the Wireshark command line application (Tshark).
With the driver, the user can start and or stop sniffing, configure and analyze Wireshark sniffing traffic results.
|
